AWS A5.4 · Low Carbon ≤0.04% · All Position

TOKO E308L-16 Stainless Steel Electrode

The premier choice for welding 304L, 304 and similar austenitic stainless steels. Low carbon content minimises carbide precipitation, ensuring maximum corrosion resistance in the as-welded condition — with smooth arc, easy slag removal and all-position versatility.

  • AWS A5.4 / ASME SFA-5.4
  • Low Carbon ≤ 0.04%
≤0.04% Carbon Content
18–21% Chromium Content
≥550MPa Tensile Strength
≥35% Elongation
AWS A5.4 · 304/304L TOKO E308L-16 stainless steel welding electrodes in box and on workbench
TOKO E308L-16 welding application on stainless steel pipe
TOKO E308L-16 electrode packaging
Rutile-Coated · E308L-16 · Low Carbon

TOKO E308L-16 — The Standard for 304/304L Stainless

TOKO E308L-16 is a rutile-coated, low-carbon stainless steel stick electrode designed for welding austenitic stainless steels such as 304L, 304 and 321. The controlled carbon content (≤ 0.04%) provides excellent resistance to intergranular corrosion in the as-welded condition, while the rutile coating delivers a smooth, stable arc and self-detaching slag.

AWS A5.4 ASME SFA-5.4 Low Carbon ≤0.04% 304 / 304L

Key Advantages

  • AWS A5.4 / SFA-5.4 compliant — full traceability and certified chemistry/mechanicals.
  • Low carbon (≤ 0.04% C) — minimises carbide precipitation, preserving corrosion resistance.
  • All-position capability — flat, horizontal, vertical-up and overhead with the -16 variant.
  • Rutile coating (E308L-16) — smooth arc, easy slag removal and fine bead appearance.
  • High corrosion resistance — ideal for food processing, chemical equipment and architectural applications.
  • Available diameters: 2.5 mm, 3.2 mm, 4.0 mm — in hermetically sealed packaging.
304 / 304L stainless Food processing Chemical equipment Architectural steel
Selection Guide

E308L vs. E316L vs. E309L: Choosing the Right Grade

Not sure which stainless steel electrode fits your application? The table below summarises the differences between the three most common austenitic stainless steel electrode grades.

Feature E308L-16 E316L-16 E309L-16
Base Metal304 / 304L stainless316 / 316L stainlessDissimilar joints
Chemistry18–21% Cr, 9–11% Ni17–20% Cr, 11–14% Ni, 2–3% Mo22–25% Cr, 12–14% Ni
Key PropertyLow carbon, general corrosion resistanceMolybdenum-enhanced pitting resistanceDilution tolerance, dissimilar welding
Typical ApplicationsFood equipment, chemical tanks, 304L pipingMarine, pharmaceutical, chemical processingStainless to carbon steel, cladding
Max Service Temp.~400 °C continuous~400 °C continuous~300 °C continuous
Technical Data

Specifications & Welding Parameters

Full chemical composition, mechanical properties, welding parameters and storage guidelines for TOKO E308L-16 stainless steel electrode.

Chemical Composition (Typical, Weld Metal)

ElementValue (%)
Carbon (C)≤ 0.04
Chromium (Cr)18.0 – 21.0
Nickel (Ni)9.0 – 11.0
Manganese (Mn)0.5 – 2.5
Silicon (Si)≤ 1.0
Phosphorus (P)≤ 0.040
Sulfur (S)≤ 0.030
Copper (Cu)≤ 0.75
Molybdenum (Mo)≤ 0.75

Mechanical Properties (As-Welded)

PropertyValue
Tensile Strength (MPa)≥ 550 (typical 580–620)
Yield Strength (MPa)≥ 350
Elongation (%)≥ 35
Hardness (HB)~ 180
Ferrite Content (FN)3 – 10 (typical 5)

Recommended Welding Parameters (DCEP or AC)

Diameter (mm)Current (A)Voltage (V)
2.560 – 9021 – 24
3.280 – 12022 – 26
4.0110 – 16024 – 28

DCEP (DC+) recommended for optimal arc stability. Use short arc and preheat only if required by base metal thickness. Maintain interpass temperature ≤ 150 °C to avoid hot cracking.

Storage & Re-drying Guidelines

ConditionRequirement
Unopened packagingStore in dry place (< 60% RH)
Opened electrodesUse within 8 hours, or hold at 100–150 °C
Re-drying (if damp)250–300 °C for 1 hour

Store in original hermetically sealed packaging. Moisture ingress can cause porosity and reduce corrosion resistance.

Applications

Where TOKO E308L-16 Performs Best

Trusted in industries where hygiene, durability and corrosion resistance are paramount.

Food Processing

Tanks, piping and equipment requiring clean, corrosion-resistant welds to hygiene standards.

Chemical Equipment

Reactors, storage vessels and piping for mild chemical environments.

Architectural Steel

Handrails, facades and structural stainless steel components exposed to weathering.

General Fabrication

Dairy equipment, pharmaceutical machinery and brewery installations.

Shipbuilding Fittings

Interior fittings, railings, and non-critical marine structures.

Cryogenic Equipment

Service down to −196 °C where austenitic stainless toughness is essential.

FAQ

E308L — Frequently Asked Questions

E308L has a controlled maximum carbon content of 0.04%, which reduces the risk of chromium carbide precipitation during welding. This makes E308L the preferred choice for applications requiring maximum corrosion resistance in the as-welded condition, especially when welding 304L base metal.

The suffix -16 indicates a rutile-based coating with a potassium silicate binder. It is designed for use with AC or DCEP (DC+) and provides a smooth arc, easy slag removal and excellent all-position weldability. It is the most common and versatile variant for stainless steel electrodes.

Yes, E308L is perfectly suitable for welding 304 stainless steel. Its low carbon content provides extra assurance against sensitization, especially if the welded component will be exposed to corrosive environments. For 304L base metal, E308L is the standard choice.

Preheat is generally not required for austenitic stainless steels like 304L when using E308L. However, for thick sections (over 20 mm) or highly restrained joints, a maximum interpass temperature of 150 °C is recommended to avoid hot cracking. Post-weld heat treatment is typically not necessary.

Standard MOQ is one pallet (approximately 1–2 tons). Typical production lead time is 15–25 days for stock grades and 25–35 days for custom packaging or private-label orders. Free samples are available for qualified buyers.

Request a Quote

Get E308L-16 Pricing & Technical Data Within 24 Hours

Tell us your base material, welding position, standard and monthly volume. Our welding engineers will recommend the right diameter and confirm chemistry compliance, and send a full quotation with mill certificates and shipping options.

  • Reply within 24 hours
  • Free sample for qualified buyers

Quick Enquiry — E308L-16 Electrode

We never share your details. Fields marked * are required.

✓ Thank you! Your enquiry has been prepared — your email client will open shortly.

Downloads

Certifications & Technical Documents

Download batch-specific material certificates, safety data sheets and welding procedure guidelines. All certifications are third-party verified and comply with AWS A5.4 / ASME SFA-5.4.

Get a Quote